Category

Bolix - leveling and mortar Bolix W

manufacturer: Bolix

Category: BOLIX - construction chemicals

product #: 11426

Order multiples of: 1 Add to cart

Add to wish list Ask about product Report an error in description Installment purchase is available from 100 PLN of product value or the entire order. Leasing is available from PLN 369 of the value of the product

Price on request

price-list
net unit price
£6,32
for package
discount price
net unit price
£6,23
for package
minimum trading quantity
the amount of product
1.00 package
unit
trading
1.00 package
total price
net list price
£6,32
for 1.00 package
total price
discounted net price
£6,23
for 1.00 package
price-list
gross unit price
£7,78
for package
discount price
gross unit price
£7,66
for package
minimum trading quantity
the amount of product
1.00 package
unit
trading
1.00 package
total price
gross list price
£7,78
for 1.00 package
total price
gross discount price
£7,66
for 1.00 package

Product description

It is used to level and fill unevenness in mineral substrates before making thin-layer plaster, fastening thermal insulation boards in thermal insulation systems, laying ceramic and stone cladding and pouring self-leveling floor mortars (on a cement or anhydrite basis). It is used outside and inside the building (including also in rooms exposed to temporary moisture), on non-deformable concrete, anhydrite substrates, on ceramic brick walls, sand-lime brick, cellular concrete as well as on cement and cement-lime plaster coatings . BOLIX W mortar is also used for masonry with a block and a component of cellular concrete

Technical data

  • Mixing proportions: 2.75 3.25 l of water per 25 kg of mortar
  • Compressive strength (after 28 days):> 8 MPa
  • Flexural strength (after 28 days):> 3 MPa
  • The load caused by walking layers of thickness 15 mm: after 24 hours
  • Full load: after 14 days
  • Consistency: dry powder
  • Shelf life: under appropriate conditions, up to 12 months from the date of production
  • Moisture resistance: periodically resistant
  • Aging resistance: resistant
  • Oil and solvent resistance: not resistant
  • Acid and alkali resistance: not resistant
  • Temperature resistance: from -20 C to +50 C
  • all technical data are provided for a relative humidity of 60% and an air temperature of +20 C /
  • The average consumption of adhesive mortar for making the dressing layer on a properly prepared substrate is approx. 1.90 kg / m2 for every 1 mm of layer thickness. In order to determine the exact consumption of the product, it is recommended to carry out tests on a given surface.
  • composition: BOLIX W mortar is a dry mixture of hydraulic binders, polymer, base of fine-grained mineral fillers and modifying additives.

Technical data

amount in box:
25 kg
application temperature range:
5 - 25 °C
bulk density:
1,7 kg/dm³
color:
grey
fire classification - reaction to fire:
A1
thickness:
5 - 15 mm
time consumption:
45 min.

Attachments