A two-component bituminous mass that hides cracks in the substrate and is flexible. Used as a thick-layer, bitumen-rubber sealing compound for insulation works.

Properties

• flexibility
• waterproof
• without solvent in
• resistance to light rain after about 4 hours at a temperature of +20 C
• for vertical and horizontal surfaces
• inwards and outwards (from the water pressure side)
• manual and machine application
• in accordance with the EN 15814 standard, it can be used to make watertight coatings of underground parts of buildings and structures
• meets the requirements of light, medium and heavy type insulation

Application

The product is used to insulate mineral substrates (e.g. masonry with full joint, plaster, concrete, screed) against ground moisture, water that does not exert pressure and exerts hydrostatic pressure. Also suitable for existing bituminous coatings. It is used for insulation on foundation walls, balconies, terraces and ceilings, but also for fixing ground-covered insulation and drainage boards. The product should not be used as a top layer (final) for waterproofing roofs.

Technical data

• base of component A - polymer-bituminous emulsion with a special system of fillers
• component B base - cement-based dry mix
• mixing ratio 3 parts by weight of component A to 1 part of component B
• working time approx. 60-90 minutes
• temperature resistance during transport and storage from 0 C to +30 C
• thermal resistance after complete hardening from -20 C to +80 C
• application temperature (substrate and surroundings) from +5 C to +30 C
• complete drying time approx. 2 days
• waterproof after about 2 days
• approximate consumption approx. 1.1 kg / m ² / mm of wet layer thickness
• 28 kg kit: component A 21 kg + component B 7 kg