Coester - CT 228 Flex two-component epoxy resin
Price on request
discount price
net unit price
£23,10 for kg
minimum trading quantity
the amount of product
6.00 kg
total price
net list price
£165,08
for 6.00 kg
total price
discounted net price
£138,62
for 6.00 kg
price-list
gross unit price £33,84
for kg
discount price
gross unit price
£28,42
for kg
minimum trading quantity
the amount of product
6.00 kg
total price
gross list price
£203,05
for 6.00 kg
total price
gross discount price
£170,50
for 6.00 kg
Product description
Colored epoxy resin, two-component used for making chemically resistant coatings on steel and concrete surfaces. The material has the ability to bridge cracks in the substrate and has a high surface value.
Properties
- two-component
- stained
- for making chemically resistant coatings on steel and concrete surfaces
- high adhesion to mineral substrates (except gypsum), as well as to steel and stainless steel
- has the ability to bridge cracks in the substrate and has a high surface hardness
Application
- chemical protection of concrete and steel substrates in industrial facilities
- on tanks in sewage treatment plants, livestock facilities, as well as in biogas plants
- on vertical and horizontal surfaces
- a protective layer of heavily loaded industrial floors
- chemically and mechanically resistant epoxy resin casing layer with quartz sand
- it can also be used in traffic areas as a closing coat of thick-layer systems in the protection of the substrate made as scratch putty
- when using the product on vertical surfaces, add Koester Stellmittel to the CT 228 Flex resin in an amount up to 6% by weight
Technical data
- a density of about 1.2 kg / l
- time to use (+10 C, +20 C) 60 min, 40 min
- application (ambient) temperature from +8 C to +30 C
- minimum substrate temperature +8 ° C
- material temperature during application from +15 C to +25 C
- color similar to RAL 7032 (other colors on request)
- adhesion: ≥ 1.5 N / mm 2 ; standard concrete C25 ≥ 1.5 N / mm 2 (failure in concrete); steel> 4 N / mm 2 (DIN EN ISO 12944-4, Ry 50 μm)
- subsequent layers after about 24 hours
- consumption: concrete min. 1.2 kg / m / mm; steel: 0.65 kg / m (500 μm)
- packing set of 6 kg
Technical data