Drizoro - Concreseal thin layer mortar - 1
Price on request
discount price
net unit price
£2,01 for kg
minimum trading quantity
the amount of product
29.00 kg
total price
net list price
£63,47
for 29.00 kg
total price
discounted net price
£58,43
for 29.00 kg
price-list
gross unit price £2,69
for kg
discount price
gross unit price
£2,48
for kg
minimum trading quantity
the amount of product
29.00 kg
total price
gross list price
£78,07
for 29.00 kg
total price
gross discount price
£71,87
for 29.00 kg
Product description
Two-component mortar based on microcement and synthetic acrylic resin, especially recommended for creating a smooth finishing and decorative coating of low thickness or sharp. It is characterized by great abrasion resistance and resistance to weather conditions.
Features
- creates an uninterrupted smooth leveling film with no joints or seams on walls and floors
- good adhesion to many different substrates: concrete, mortar, ceramic tiles, etc.
- does not require priming
- very good resistance to abrasion and weather conditions
- suitable for use under water immersion
- very low water absorption: suitable for humid places such as kitchens or bathrooms
- easy and clean material for application
- allows diffusion and water vapor permeability
Application
- decorative finish smoothing and sealing mortar in exterior and interior applications
- smooth decorative finish of Maxseal or Maxseal Flex waterproofing coatings in swimming pools, ponds, artificial lakes, etc.
Technical data
- external appearance and color of component A - white, milky liquid
- external appearance and color of component B gray or white powder
- specific gravity of component A (liquid) at 20 ° C and 50% relative humidity 1.00 0.10 g / cm 3
- specific gravity of component B (powder) at 20 ° C and 0.90 0.10 g / cm 3 relative humidity
- weight ratio of the component in A: B in the mix: 9:20
- minimum application temperature of substrate and surroundings> 5 ° C
- Shelf life of the A + B mix at 20 C and 50% relative humidity approx. 20–30 min
- time interval between the application of successive layers at a temperature of 20 C and a relative humidity of 50%> 30 min
- setting time at 20 ° C and 50% relative humidity 3–4 h
- maturing time before putting into service for pedestrian traffic at 20 ° C and 50% relative humidity 24 hours
- compressive strength after 28 days> 45 MPa (according to EN 12190)
- adhesion to concrete after 28 days> 1.5 MPa (according to EN 1542)
- layer thickness 0.20-0.25 mm
- consumption per one layer / total 0.20–0.25 / 0.4–0.5 kg / m 2
- package 29 kg
Technical data