Category

Drizoro - Maxurethane polyurethane protective coating

manufacturer: Drizoro

Category: DRIZORO - waterproofing

product #: 31716

Order multiples of: 1 Add to cart

Add to wish list Ask about product Report an error in description Installment purchase is available from 100 PLN of product value or the entire order. Leasing is available from PLN 369 of the value of the product

Price on request

price-list
net unit price
£20,60
for kg
discount price
net unit price
£18,95
for kg
minimum trading quantity
the amount of product
5.00 kg
unit
trading
5.00 kg
total price
net list price
£103,02
for 5.00 kg
total price
discounted net price
£94,76
for 5.00 kg
price-list
gross unit price
£25,34
for kg
discount price
gross unit price
£23,31
for kg
minimum trading quantity
the amount of product
5.00 kg
unit
trading
5.00 kg
total price
gross list price
£126,71
for 5.00 kg
total price
gross discount price
£116,56
for 5.00 kg

Product description

Maxurethane is a polyurethane protection for concrete and steel surfaces. It is available as a one-component protective coating based on transparent, synthetic, air-drying polyurethane resins, which creates a glossy finish. Suitable for indoor applications. It is characterized by high resistance to abrasion and chemical attack.

Technical data

  • CE marking in accordance with EN 1504-2
  • clear, slightly yellow liquid
  • shiny and transparent film when dry
  • specific gravity (at 20 C) 1.05 0.1 g / cm 3
  • flash point above 80 ° C
  • ambient temperature at the application of 10-30 C
  • relative humidity at application 30-85%
  • the relative temperature of the substrate when applying above 10 ° C
  • Relative humidity of the substrate when applied below 5%
  • time lapse between the application of the individual layers (at 20 C) 2-4 h
  • Total drying time before putting into service on foot (at 20 C, 50% RH): 1 day
  • total drying time before putting into service for heavy machinery, before permanent immersion in water or flood test (at 20 C, 50% relative humidity): 3 days
  • water vapor permeability (according to EN ISO 7783-1 / -2): class I - material permeable to water vapor; SD classification below 5 m
  • water permeability and capillary absorption (according to EN 1062-3) below 0.1 kg m 2 h 0.5
  • CO 2 permeability (according to EN 1062-6) SD over 50 m
  • adhesion to concrete after 28 days (according to EN 1542) from 1.0 MPa
  • adhesion to steel (in accordance with ASTM D-4541) 2.05 MPa
  • adhesion to concrete (in accordance with ASTM D-4541) 2.85 MPa
  • abrasion resistance (Taber index) in accordance with ASTM D-4060 - wear index (abrasive wheel: CS-10 and load 1 kg): after 500 cycles 0.0108; after 1000 cycles: 0.0140
  • resistance to severe chemical attack according to EN 13529 (reduction on the Shore hardness scale): class I - G-1 (2%), G-9 (3%), G-10 (3%), G-11 ( 2%); class II - G-1 (3%), G-9 (5%), G-10 (5%), g-11 (3%)
  • sliding resistance factor according to UNE-ENV 12633 (Rd): class 3
  • suitable for contact with drinking water in accordance with BS 6920
  • suitable for contact with food products: alcoholic, fatty, acidic and water based in accordance with 2000/72 / EC

Application

  • protection of floors against aggressive chemical attack and abrasion
  • chemical protection of the material in waterproofing in drinking water tanks and other water reservoirs
  • Protective sealing system in epoxy or liquid waterproofing membranes exposed to abrasion
  • high-performance anti-dust coating on concrete floors and pavements in parking lots, warehouses, shopping malls, ice rinks, sports centers, offices, exhibition halls
  • multi-layer system on wet surfaces, ramps, stairs, cold stores, workshops, loading docks
  • for industrial floors, tanks, for the food and pharmaceutical industries