Category

Drizoro - Maxseal Super crystallization waterproofing mortar

manufacturer: Drizoro

Category: DRIZORO - waterproofing

product #: 31712

Order multiples of: 1 Add to cart

Add to wish list Ask about product Report an error in description Installment purchase is available from 100 PLN of product value or the entire order. Leasing is available from PLN 369 of the value of the product

Price on request

price-list
net unit price
£1,65
for kg
discount price
net unit price
£1,43
for kg
minimum trading quantity
the amount of product
25.00 kg
unit
trading
25.00 kg
total price
net list price
£41,32
for 25.00 kg
total price
discounted net price
£35,79
for 25.00 kg
price-list
gross unit price
£2,03
for kg
discount price
gross unit price
£1,76
for kg
minimum trading quantity
the amount of product
25.00 kg
unit
trading
25.00 kg
total price
gross list price
£50,83
for 25.00 kg
total price
gross discount price
£44,02
for 25.00 kg

Product description

Maxseal Super is a powder mix of Portland cement, fine aggregate and selected chemical additives. After mixing with water, a waterproof insulating layer and a surface crystallized layer of concrete base are formed. Due to the phenomenon of crystallization, i.e. the formation of insoluble crystalline structures in the pores and capillaries of concrete, additional surface sealing of the substrate is obtained. After setting, it can be painted or covered with ceramic tiles.

Technical data

  • aggregate size up to 0.63 mm
  • dry mix density 1.15 0.10 g / cm 3
  • minimum time between coats 6-8
  • maximum time between coats 12-16
  • initial hardening time above 60 min
  • shelf life 30-40 minutes
  • mixing water (up to product weight) 26 2%
  • resistance to the coating of positive pressure: 8.5 atm, negative pressure: 2.5 atm
  • compressive strength after 28 days (EN 13892-2) over 40.7 MPa
  • bending strength after 28 days (EN 13892-2) above 8 MPa
  • adhesion to concrete after 28 days (EN 1542) 1.61 MPa
  • vapor permeability (EN ISO 7783-1 / -2) V (g / m2 for D (m): 340.22 / 0.06
  • water absorption (EN 1062-3) 0.03 kg / m 2 h 0.5

Application

  • as a watertight, chemically resistant coating insulation on concrete or reinforced concrete surfaces
  • for protection and sealing of surfaces in a hydrotechnical facility, a tank in a sewage treatment plant, a potable water tank, a foundation in, cellars, a swimming pool
  • in facilities exposed to positive and negative effects of water under hydrostatic pressure
  • for application on cement plasters, stone and brick
  • they are suitable for use in places of permanent residence for humans and animals

It is possible to use on wet surfaces.