Drizoro - Maxbeton, quick-setting and shrink-free hydraulic repair mortar
Price on request
discount price
net unit price
£0,93 for kg
minimum trading quantity
the amount of product
25.00 kg
total price
net list price
£26,01
for 25.00 kg
total price
discounted net price
£23,27
for 25.00 kg
price-list
gross unit price £1,28
for kg
discount price
gross unit price
£1,14
for kg
minimum trading quantity
the amount of product
25.00 kg
total price
gross list price
£32,00
for 25.00 kg
total price
gross discount price
£28,63
for 25.00 kg
Product description
Maxbeton is a quick-setting, shrink-free hydraulic mortar for repairing water-conducting defects under low pressure. It is available as a one-component product, to be mixed only with water.
Technical data
- gray powder
- apparent density of the powder 1.25 g / cm 3
- pH 11.5
- mixing water (up to weight) 20-21%
- apparent mortar density 2.10 g / cm 3
- mixing time (at +20 C) 4-5 min
- setting time (at +20 C) 7-10 min
- time between coats (at +20 C) 5-6 min
- frost resistance tested after 200 freezing and thawing cycles (according to IBDiM No. PB / TM-1/12 procedure): weight loss up to 5%; decrease in bending strength up to 20%; decrease in compressive strength by up to 20%
- adhesion to the substrate, pull-off method, 1.68 MPa after frost resistance test
- fresh mortar consistency 10-12 cm
- consumption approximately 1.8 kg / l
- approximate filling after 1 kg of the product is consumed 0.55 l
Application
- sealing, repairing water-conducting defects under low pressure
- anchoring the element in plastic and metal, in concrete, masonry, cement plaster
- sealing around pipes and draining in cisterns, water tanks etc.
- laying and attaching covers and drain grates
- application on horizontal and vertical planes
Maxbeton is an expansive mortar - the volume increases during setting. It does not contain chloride and does not cause corrosion.
Technical data