Category

Drizoro - Maxrite S filling mortar

manufacturer: Drizoro

Category: DRIZORO - waterproofing

product #: 31720

Order multiples of: 1 Add to cart

Add to wish list Ask about product Report an error in description Installment purchase is available from 100 PLN of product value or the entire order. Leasing is available from PLN 369 of the value of the product

Price on request

price-list
net unit price
£0,77
for kg
discount price
net unit price
£0,72
for kg
minimum trading quantity
the amount of product
25.00 kg
unit
trading
25.00 kg
total price
net list price
£19,24
for 25.00 kg
total price
discounted net price
£17,89
for 25.00 kg
price-list
gross unit price
£0,95
for kg
discount price
gross unit price
£0,88
for kg
minimum trading quantity
the amount of product
25.00 kg
unit
trading
25.00 kg
total price
gross list price
£23,66
for 25.00 kg
total price
gross discount price
£22,01
for 25.00 kg

Product description

Maxrite S is a PCC / SPCC filling mortar for repairing a hole in concrete. It is available as a one-component, fine-grained cement-polymer product with microsilica, to be mixed only with water. It has thixotropic properties, thanks to which it allows application up to 5 cm in one layer.

Technical data

  • maximum grain size 3 mm
  • dry mix density 1.3 0.1 g / cm 3
  • mixing with water (by weight) 14 2%
  • application setting time (at 20 ° C) initial 3-4 hours; final 7-8 hours
  • the density of the hardened mortar 2.0 0.1 g / m 3
  • compressive strength after 28 days (EN 12190) from 45 MPa
  • ion content in chloride (UNE-EN 1015-17: 2001) up to 0.05%
  • adhesion to the substrate (EN1542) from 2.0 MPa
  • modulus of elasticity (EN 13142) from 20 GPa
  • resistance to carbonation (EN13295) up to 4.0 mm
  • capillary absorption (EN 13057) up to 0.5 kg / m 2 h 0.5
  • fire resistance class A 1
  • adhesion after freeze-thaw cycles (EN 13687-1) from 2.0 MPa
  • adhesion after wetting cycles (EN 13687-2) from 2.0 MPa
  • adhesion after drying cycles (EN 13687-4) from 2.0 MPa
  • layer thickness minimum / maximum 5/50 mm
  • consumption 1.7 0.1 kg / m 2 / mm

Application

  • concrete repair
  • concrete replenishment
  • leveling concrete
  • hydrotechnical and bridge structures
  • increasing the thickness of the floors
  • protection against carbonation
  • resistance to frost and defrosting salts
  • water vapor diffusion
  • resistance to mechanical stress

Maxrite S can be applied by hand or by dry and wet spraying technology. Non-toxic product.