Category

Koester - quick-setting mortar KB-Fix 5

manufacturer: Koester

Category: KOESTER - construction chemicals

product #: 30997

Order multiples of: 1 Add to cart

Add to wish list Ask about product Report an error in description Installment purchase is available from 100 PLN of product value or the entire order. Leasing is available from PLN 369 of the value of the product

Price on request

price-list
net unit price
£5,01
for kg
discount price
net unit price
£3,93
for kg
minimum trading quantity
the amount of product
7.50 kg
unit
trading
7.50 kg
total price
net list price
£37,55
for 7.50 kg
total price
discounted net price
£29,48
for 7.50 kg
price-list
gross unit price
£6,16
for kg
discount price
gross unit price
£4,83
for kg
minimum trading quantity
the amount of product
7.50 kg
unit
trading
7.50 kg
total price
gross list price
£46,18
for 7.50 kg
total price
gross discount price
£36,26
for 7.50 kg

Product description

Koester KB-Fix 5 is an instant binding, water-resistant, weatherproofing mortar for quick assembly and repair. Does not contain chloride and soda.

Technical data

Fresh mortar density approx. 1.8 kg / l
Compressive strength (2 hours)> 4 N / mm
Compressive strength (24 hours)> 11 N / mm
Compressive strength (7 days)> 30 N / mm
Compressive strength (28 days)> 60 N / mm
Flexural strength (2 hours)> 1.3 N / mm
Flexural strength (24 hours)> 2.5 N / mm
Flexural strength (7 days)> 4 N / mm
Start of binding after approx. 5 minutes (+ 20 C)
Application of subsequent layers after approx. 3 hours
E-Module approx. 19,000 N / mm
The minimum application temperature is +5 C

Application

K STER KB-Fix 5 is used to perform quick additions and repairs of defects and scratches in plaster and masonry, as well as for fixing the hook in, dowel, gutters and downpipes, balustrades, grilles, radiator as well as minor repairs, sealing pipe penetrations. The material can be used both indoors and outdoors.

K STER KB-Fix 5 mortar is used for closing scratches and expansion joints during sealing by means of pressure injection with K STER KB-Pur IN polyurethane resins, the mortar is also suitable for filling holes in injection packers.

Subsoil

Loose, weak plaster or masonry should be removed from the substrate, moistened areas and scratches should be moistened with water.

Method of implementation

Mix K STER KB-Fix 5 dry mortar with water in a 3: 1 volume ratio until a thick, putty compound is obtained. When sealing and repairing larger surfaces, press the material with a board or putty to tie. At low temperatures, mix the material with lukewarm water (approx. +20 C). The mortar can be mixed with rinsed sand or Portland cement (a test should be carried out beforehand).


Technical data

use:
1,8 kg/l