Purmo - Aquilo FMK 140 channel heater
Price on request
discount price
net unit price
£0,00 for item
minimum trading quantity
the amount of product
1.00 item
total price
net list price
£0,00
for 1.00 item
total price
discounted net price
£0,00
for 1.00 item
price-list
gross unit price £0,00
for item
discount price
gross unit price
£0,00
for item
minimum trading quantity
the amount of product
1.00 item
total price
gross list price
£0,00
for 1.00 item
total price
gross discount price
£0,00
for 1.00 item
Product description
Aquilo FMK is a ductless heater without a fan. Intended for floors of heated rooms. The heating element is a copper-aluminum heat exchanger mounted in a galvanized steel tub. The bathtub (from the inside) and the exchanger are painted black. From the top, the radiator is protected by a transverse or longitudinal cover grille (to be ordered separately).
Technical data
- exchanger material: copper tubes with aluminum fins
- bathtub material: galvanized steel sheet as standard (black powder coated RAL 9005 on the inside); optional stainless steel
- grille material: wood (oak, beech); duralumin (natural, light brown, dark brown or black); stainless steel
- Connections 2 x G 1/2 '' internal thread
- working pressure 10 bar
- pressure 13 bar
- maximum temperature 110 C
- height 140 mm
- length from 1000 to 3500 mm
- width 180, 260, 290, 340, 420 mm
- 10 years warranty
Thermal power of the radiator given according to PN-EN 442.
Building
1 - rolled up crosswise grid or longitudinal grid - the drawing shows the longitudinal grid for which reinforcing mounting crossbars are required
2 - optional finishing strips type L, Z or U (only for the PML, PMZ and PMU grilles; not available for the type PMO) - the drawing shows the type Z strip
3 - convection plate
4 - heat exchanger
5 - masking plate connection to central heating installation
6 - radiator bathtub
7 - air vent
8 - fastening elements to the ground
9 - connection culverts for central heating installation (to break down)
10 - reinforcing mounting bars (only for longitudinal grilles)
Equipment
heat:
- manual air vent
- two side covers for the heat exchanger
- set of flexible 10 cm long stainless steel connections with G 1/2 '' thread
Bath:
- M8x30 mm leveling screws with an internal hexagon (for tub length up to 2.5 m - 4 pcs, above 2.5 m - 6 pcs)
- 4 fixing accessories to the base with fixing screws for the bathtub
- break-through bushings for connecting central heating installations
- 2 rubber grommets for connecting the electrical installation
- steel sheet cover masking connections to the heat exchanger
- a fibreboard that protects the heat exchanger and the bathtub against damage or contamination during installation and protects against deformation of the bathtub during concreting
Technical data