Arbet - expanded polystyrene board Facade Expert EPS 040
Price on request
discount price
net unit price
£39,51 for m3
minimum trading quantity
the amount of product
1.00 m3
total price
net list price
£54,61
for 1.00 m3
total price
discounted net price
£39,51
for 1.00 m3
price-list
gross unit price £67,17
for m3
discount price
gross unit price
£48,60
for m3
minimum trading quantity
the amount of product
1.00 m3
total price
gross list price
£67,17
for 1.00 m3
total price
gross discount price
£48,60
for 1.00 m3
Product description
EPS 040 facade foam boards can be used in applications requiring low mechanical loads, in particular for thermal insulation in the following places:
- walls made using the "light wet" (BSO, ETICS) method or "light dry" method,
- surfaces of skeleton walls,
- crevices of closed or ventilated three-layer walls,
- wreaths, jambs, lintels and other places exposed to thermal bridges,
- balcony loggias,
- layered walls;
- continuous outer layers of skeleton walls,
- wreaths in the formwork method lost to plaster,
- floors from below with the "light wet method",
- reinforced concrete floors,
- steep roofs under and between the rafters.
- In particular, for thermal insulation in the following places:
- diaphragm walls with ventilated and non-ventilated air gap,
- expansion joints in constructions,
- in internal partitions,
- walls in frame construction with cladding,
- floors from below with cladding,
- floors between joists,
- light skeleton ceilings with cladding,
- insulation between rafters,
- ventilated flat roofs.
attention
Milled edges "overlapped": surcharge 8.00 PLN / m3. Please provide information about the thickness and finish of the panel edges in the commentary to the order. Plate thickness range: from 10 to 300 mm. Due to frequent price movements, for reasons beyond our control, please confirm the price each time you buy.
Technical data
- bending strength BS115:
- >=115 kPa
- dimensional stability under constant normal laboratory conditions DS(N)2:
- ± 0,2 %
- Dimensional stability under specified temperature and humidity DS(70,-)2:
- <= 2 %
- fire classification - reaction to fire:
- E
- length:
- 1000 mm
- length (dimensional tolerance class):
- ± 2 mm
- squareness (dimensional tolerance class):
- ± 2/1000 mm/mm
- thermal conductivity λ:
- 0,040 W/mK
- thickness (dimensional tolerance class):
- ± 1 mm
- thickness range:
- 10 - 300 mm
- width:
- 500 mm
- width (dimensional tolerance class):
- ± 2 mm
Attachments