Drizoro - Maxelastic Trans polyurethane-elastomer membrane
Price on request
discount price
net unit price
£15,74 for kg
minimum trading quantity
the amount of product
5.00 kg
total price
net list price
£79,03
for 5.00 kg
total price
discounted net price
£78,72
for 5.00 kg
price-list
gross unit price £19,44
for kg
discount price
gross unit price
£19,37
for kg
minimum trading quantity
the amount of product
5.00 kg
total price
gross list price
£97,21
for 5.00 kg
total price
gross discount price
£96,83
for 5.00 kg
Product description
A one-component product, ready to use, based on special aliphatic polyurethane resins, which, when exposed to moisture, create a transparent, highly flexible coating. The product is used for long-term protection and waterproofing of concrete, cement-based mortars, bricks, tiles, stone, glass, etc.
Features
- very high flexibility, both at high and low temperatures, allowing to absorb thermal displacements and vibrations of the ground under extreme weather conditions
- resistance to UV radiation
- creates a uniform waterproofing layer that does not require joints and permanently seals any cracks
- excellent ability to transfer cracks, thanks to which it behaves like a membrane on the substrate protecting any cracks that may occur
- good abrasion resistance. The product is adapted to the traffic load of pedestrians
- excellent adhesion to the material commonly used as a substrate; does not require priming
- good chemical resistance to de-icing salts, sea water, sewage, acid and alkaline solutions
- withstands a wide range of temperatures from -40 C to 100 C
- provides long-term protection that does not require maintenance
- long-term protection compared to paints or other coatings
- does not require maintenance
- ready-to-use product
- easy to apply
- application by hand or spray
Application
- transparent and flexible waterproofing for roofs, terraces and balconies exposed to pedestrian traffic
- coating protection, against the influence of harmful factors in the weather, on bricks, ceramic tiles, stone, etc.
- sealing and protection of transparent coverings and the roof made of glass, plastic or polycarbonate
Technical data
- external appearance homogeneous substance
- temperature at the application 5 ° C
- Relative humidity at application <90%
- drying time at 20 ° C and 50% relative humidity 10–12 h
- maturing time at 20 ° C and 50% relative humidity 3 days
- elongation at break 320% (according to ASTM D-412)
- tensile strength 20.3 MPa (according to ASTM D-412)
- adhesion to concrete> 2.0 MPa (according to ASTM D-4541)
- water vapor permeability Sd (m, air layer) / 6.2 / 3195 (according to EN-ISO 7783)
- approximate consumption per layer / total coverage: 0.5-0.6 / 1.0-1.2 kg / m 2
- approximate thickness per layer / total application 0.5 / 1.0 mm
- the appearance of the coating is transparent
- packaging 5 kg and 25 kg cans
Technical data