Price on request
JARPLAST MONO PYE PV250 S52 top-sealable roofing felt is produced from high-quality asphalt in SBS-modified elastomers. The warp is a heavyweight polyester fabric with high elasticity and very high tear strength. The outer surface is covered with coarse mineral sprinkles, the underside of the roofing felt paper is secured with easily fusible plastic film. Along one edge of the web there is an overlap secured with plastic foil.
JARPLAST MONO top-sealable roofing paper is intended for waterproofing insulation, new and renovation of old roofing, in particular for single-layer roofing or as a top layer in multi-layer roofing.
JARPLAST MONO roofing due to its high flexibility is recommended for use on roofs in large areas, e.g. factory halls, apartment blocks, supermarkets, etc., insulated roofs or those made without insulation, and wherever the roofs are subject to significant deformations, structural movements and vibrations .
JARPLAST MONO roofing paper can also be used for waterproofing and dampproofing buildings and structures, among others vertical and horizontal foundation insulation, floor insulation for concrete screeds, insulation on full boarding, steep roofs, roofs covered with sheet metal or sheet metal, as well as for roofing work.
In the case of multilayer roofing using a roofing felt on a matrix of a veil of glass fibers, it is required to make a topcoat using roofing felt on another matrix. In this case, it is possible to use JARPLAST MONO roofing felt.
Rolls of roofing felt should be stored in covered rooms, protecting the roofing felt against moisture, sunlight, away from the heater. Rolls should be stored upright in one layer.
Rolls of roofing felt should be transported in covered means of transport, loaded in one layer, in a standing position, protected against falling over and damage. Rolls of roofing felt should be laid so as to prevent movement during travel. Rolls of roofing felt can be transported in containers or on pallets.