A cleaner for fresh dirt from polyurethane foams.
Application
- removes uncured polyurethane foams and adhesives
- necessary to clean the valve in the containers and the gun in dispensing one-component assembly and sealing foam
- perfect for degreasing steel surfaces before using polyurethane and silicone w
- removes grease, oils, fats etc., materials and substances
properties
- quickly and effectively dissolves dry foam
- thoroughly cleans the inside of the gun without blocking it
- necessary to maintain the gun in good condition
- the carrier gas used in the preparation is a mixture harmless to the ozone layer
Method of use
- Surface cleaning:
- Apply the attached red spray head to the Expert Line Cleaner valve.
- Spray fresh foam or adhesive in polyurethane.
- When cleaning the dirty outlet of the polyurethane foam container, thoroughly spray the cleaner onto the valve and the pistol adapter.
- Remove dirt with a dry cloth.
- Gun cleaning:
- Disconnect the gun from the polyurethane foam container and remove any remaining polyurethane foam in the gun by pressing the gun handle.
- Apply the red spray head to the cleaner valve and spray the connector - gun seat.
- Remove the red spray head and place the cleaner in the gun seat.
- Press the gun lever again.
- Repeat the procedure until the polyurethane foam is completely cleaned of the internal parts of the gun.
- Thoroughly dry all cleaned surfaces.