Arbet - Styrofoam board Facade Classic EPS 045
Price on request
discount price
net unit price
£35,17 for m3
minimum trading quantity
the amount of product
1.00 m3
total price
net list price
£47,99
for 1.00 m3
total price
discounted net price
£35,17
for 1.00 m3
price-list
gross unit price £59,03
for m3
discount price
gross unit price
£43,26
for m3
minimum trading quantity
the amount of product
1.00 m3
total price
gross list price
£59,03
for 1.00 m3
total price
gross discount price
£43,26
for 1.00 m3
Product description
Classic facade polystyrene boards can be used in applications requiring low mechanical loads, in particular for thermal insulation in the following places:
- walls made using the "light wet" (BSO, ETICS) method or "light dry" method,
- surfaces of skeleton walls,
- crevices of closed or ventilated three-layer walls,
- wreaths, jambs, lintels and other places exposed to thermal bridges,
- balcony loggias,
- layered walls;
- continuous outer layers of skeleton walls,
- wreaths in the formwork method lost to plaster,
- floors from below with the "light wet method",
- reinforced concrete floors,
- steep roofs under and between the rafters.
- In particular, for thermal insulation in the following places:
- diaphragm walls with ventilated and non-ventilated air gap,
- expansion joints in constructions,
- in internal partitions,
- walls in frame construction with cladding,
- floors from below with cladding,
- floors between joists,
- light skeleton ceilings with cladding,
- insulation between rafters,
- ventilated flat roofs.
attention
Milled edges "overlapped": surcharge 8.00 PLN / m3. Please provide information about the thickness and the method of milling the edges of the panels in the comments to the order. Plate thickness range: from 10 to 300 mm. Due to frequent price movements, for reasons beyond our control, please confirm the price each time you buy.
Technical data
- bending strength BS75:
- >=50 kPa
- dimensional stability under constant normal laboratory conditions DS(N)2:
- ± 0,5 %
- Dimensional stability under specified temperature and humidity DS(70,-)2:
- <= 3 %
- edge finish:
- proste
- fire classification - reaction to fire:
- E
- flatness (dimensional tolerance class):
- ± 15 mm
- length:
- 1000 mm
- length (dimensional tolerance class):
- min(± 0,6%; ± 2) mm
- squareness (dimensional tolerance class):
- ± 5/1000 mm/mm
- squareness (dimensional tolerance class):
- ± 5/1000 mm/mm
- thermal conductivity λ:
- 0,045 W/mK
- thickness (dimensional tolerance class):
- ± 1 mm
- thickness range:
- 10 - 300 mm
- width:
- 500 mm
- width (dimensional tolerance class):
- min(± 0,6%; ± 2 mm) mm
Attachments