Atlas - lime-cement TR underlay renovation plaster
Price on request
discount price
net unit price
£13,49 for package
minimum trading quantity
the amount of product
1.00 package
total price
net list price
£15,12
for 1.00 package
total price
discounted net price
£13,49
for 1.00 package
price-list
gross unit price £18,60
for package
discount price
gross unit price
£16,59
for package
minimum trading quantity
the amount of product
1.00 package
total price
gross list price
£18,60
for 1.00 package
total price
gross discount price
£16,59
for 1.00 package
Product description
Factory prepared, dry mix based on the highest quality mineral binders, an additional and modifier, as well as quartz and trass fillers.
Features
- contains light fillers
- very high degree of porosity - plaster has a high capacity to store crystallizing salts
- the appropriate pore structure ensures excellent vapor permeability, allowing free evaporation of moisture and quick drying of the substrate
- resistance to water-soluble salts
- frost resistance
- water resistance
- contains hydrophobic additives that reduce the surface absorbability of the plaster - the surface is protected against rainfall and water ingress from the outside
- thanks to a specially selected recipe, it perfectly cooperates with historical mortars used for erecting the object undergoing renovation
- suitable for manual or machine application
- meets the requirements of WTA 2-9-04
Application
- performing plaster renovation works with a thickness of 10 to 25 mm on damp partitions, inside and outside the building in
- in historic buildings and other facilities intended for renovation of the damp and saline wall in
- on substrates with low or medium salinity, in a system with the Atlas TRO renovation rendering
- on substrates with a high degree of salinity in a system with the Atlas TRO renovation rendering coat and a layer of Atlas TRP undercoat plaster
Technical data
- mixing ratio water / dry mix 4.00-4.50 l / 25 kg
- mortar preparation temperature, substrate and ambient temperature during work from +5 C to +25 C.
- time of the mortar's readiness to work approx. 2 h
- minimum layer thickness 10 mm
- maximum layer thickness 25 mm
- maximum plaster thickness (2 layers) 40 mm
- water penetration ≤ 5 mm
- porosity> 40%
- air pore content in fresh mortar> 25%
- reaction to fire A1
- water absorption ≥ 0.3 kg / m 2 after 24 h
- water vapor permeability μ ≤ 15
- adhesion 0.3 N / mm - FP: B
- average consumption of about 12 kg of mortar per 1 m 2 , with a layer thickness of 10 mm
- meets the requirements of PN-EN 998-1: 2016
- package 25 kg
Technical data