Atlas - Ultra Geoflex highly flexible, deformable gel adhesive
Price on request
discount price
net unit price
£5,53 for package
minimum trading quantity
the amount of product
1.00 package
total price
net list price
£6,19
for 1.00 package
total price
discounted net price
£5,53
for 1.00 package
price-list
gross unit price £7,62
for package
discount price
gross unit price
£6,80
for package
minimum trading quantity
the amount of product
1.00 package
total price
gross list price
£7,62
for 1.00 package
total price
gross discount price
£6,80
for 1.00 package
Product description
Highly flexible, deformable gel adhesive, manufactured in the form of a dry mix of the highest quality cement binder, aggregates and specially selected natural and synthetic modifying agents.
Features
- for all types and formats of tiles, including ceramic, stone and glass
- on extremely difficult surfaces, incl. old tiles, terrazzo, plasterboards, OSB and waterproofing
- no runoff for mega format, even above 5 m 2
- the widest range of applications: underfloor heating, terraces and swimming pools
- for walls and floors
- thickness 2-15 mm
- outside and inside
- frost-resistant
- waterproof
Application
- types of glued tiles: tiles, terracotta, porcelain stoneware, laminated stoneware, clinker, stoneware, ceramic mosaic, concrete / cement tiles, composite boards, insulation and sound-absorbing panels; natural stone cladding (granite, marble, travertine, syenite, slate, etc.) and other tiles with high water absorption, glass mosaic, glass tiles, stained, printed, etc. - perform an application test
- files sticky component in all formats of tiles, even in excess of 5 m 2, a slim disc
- types of buildings in: residential construction, public utility facilities, educational, office, health care, commercial and service construction, religious buildings, industrial construction and multi-storey garages, industrial warehouses, communication construction, SPA facilities
- installation site: areas with low traffic, areas with medium traffic, areas with high traffic, rooms with low operational loads in all types of facilities, kitchens, bathrooms, laundries, garages (in private construction), terraces, balconies, loggias, external slab stairs, external beam stairs, e.g. cantilever stairs, passageways, elevations (including thermal insulation systems), plinth cladding in the building, technological tanks, swimming pools, fountains, jacuzzi, balneotechnology (without the use of aggressive chemicals), tanks for drinking water, saunas, showers, car washes, rooms washed with plenty of water
- Substrate type standard cement floors and screeds, anhydrite screeds, cement, cement-lime plasters, gypsum plasters, cellular concrete masonry, silicate brick or hollow brick, brick or ceramic block, gypsum block wall
Technical data
- 1.25 g / cm 3 bulk density
- mixing ratio (water / dry mix) 0.27-0.36 l / 1 kg, 1.35-1.8 l / 5 kg, 6.08-8.10 l / 22.5 kg, 6.75- 9.00 l / 25 kg
- minimum / maximum adhesive thickness 2-15 mm
- adhesive preparation temperature, substrate and ambient temperature during work from +5 C to +35 C
- maturing time 5 min
- lifetime (standby time) * approx. 4 h
- open time * minimum 30 min
- correctability * 20 min
- stepping on the floor / grouting with a cement grout * after 12 h
- pointing with epoxy grout * after 48 h
- full operational loads - pedestrian traffic * after 3 days
- full operational loads - road traffic * after 14 days
- full load under water - pool / reservoir * after 14 days
- underfloor heating (heated surfaces) * after 14 days
- reaction to fire A1 / A1 f
- joint strength expressed as initial adhesion ≥ 1.0 N / mm
- joint durability under conditioning / thermal aging conditions expressed as adhesion after thermal aging ≥ 1.0 N / mm
- durability of the joint under the influence of water / humidity expressed as: - adhesion after immersion in water ≥ 1.0 N / mm
- durability of the joint under the conditions of freeze-thaw cycles expressed as: - adhesion after freeze-thaw cycles ≥ 1.0 N / mm
- consumption for 30x30 cm tiles from 2.0 kg / m 2
* times given in the table are recommended for application conditions at a temperature of about 20 C and 55% humidity
Technical data