Drizoro - epoxy system for waterproofing Maxepox Flex
Price on request
discount price
net unit price
£11,13 for kg
minimum trading quantity
the amount of product
10.00 kg
total price
net list price
£121,16
for 10.00 kg
total price
discounted net price
£111,29
for 10.00 kg
price-list
gross unit price £14,90
for kg
discount price
gross unit price
£13,69
for kg
minimum trading quantity
the amount of product
10.00 kg
total price
gross list price
£149,03
for 10.00 kg
total price
gross discount price
£136,89
for 10.00 kg
Product description
Flexible epoxy waterproofing material for use on concrete and metal surfaces.
Features
- product suitable for contact with drinking water
- high flexibility and great mechanical properties enable the absorption of movement into the thermal substrate
- excellent adhesion to concrete and metal surfaces
- very good chemical resistance to ground salts, oils, gasoline, acid and alkaline solutions, etc.
- non-toxic material
- very good scratch-transfer capacity
- solvent-free
- great resistance to abrasion and wear
- incombustible
- also to be used in poorly ventilated areas
Application
- as waterproofing and chemical protection of concrete and metal surfaces in underground structures, foundations, cooling towers, sewers, water pipes, etc.
- as a multi-layer coating with an anti-slip finish
- as protection against chemical attack on industrial floors
- as a preparatory layer for self-leveling epoxy mortars on concrete slabs with potentially high traffic, e.g. in garages, warehouses, sports centers, etc.
- as a waterproofing and protective coating in drinking water tanks
Technical data
- specific weight A + B 1.76 g / cm 3
- solids content 100%
- Component ratio in A: B 4: 1
- pot life time at 10 C / 20 C / 30 C - 90/30/10 min
- touch dry time in 20 C 3–6 h
- complete drying time at 20 C - 4 days
- application temperature 8–30 C
- transfer of cracks: progressive method at 23 C - 0.63 mm; progressive method after 12 h at -5 C - 0.80 mm; immediate method at 23 C - 0.58 mm; immediate method after 12 h at -5 C - 0.67 mm (according to UNE 104309)
- tensile strength 10.1 MPa (according to ASTM D-412)
- elongation to break 60% (ASTM D-412)
- adhesion to concrete 4.09 MPa (according to ASTM D-4541)
- adhesion to steel 1.25 MPa (according to ASTM D-4541)
- Taber abrasion resistance in accordance with ASTM D-4060 wheel CS-10, load 500 g, 500/1000 cycles: 0.03 / 0.06
- flash point - non-flammable product
- suitability for contact with drinking water the product meets the requirements of British Standard BS-6920 and Directive 140/2003
- consumption of clean material for one layer / total 0.3-0.35 / 0.6-0.7 kg / m 2
- thickness after drying of one layer / total - 175-200 / 350-400 microns
- mixing ratio binder: sand 1: 1
- mortar consumption per 1 mm of thickness 2 kg / m 2
- recommended mortar thickness 1-2 mm
Technical data