Two-component mortar based on special cement and water-synthetic resin, which is easily applied with a brush, roller or spray. A movement-resistant coating, also resistant to positive and negative water pressure, is thus obtained, for the protection of exposed concrete floors, for automotive or industrial traffic.

Features

• waterproofing and protection of road surfaces in one product
• very high water resistance
• protects against direct and negative pressure (detachment) of water
• excellent abrasion resistance of the coating for road traffic: car in, in, in, in, in, out, in, industrial, etc.
• allows the substrate to "breathe" through the diffusion of water vapor
• high adhesion directly to concrete, no primer required
• UV resistant, color stable outdoors
• high resistance to chloride, de-icing salts, freeze-thaw cycles, atmospheric pollution, etc.
• easy to use and maintenance free
• the final texture of the Maxseal Traffic coating can be: smooth, non-slip, under the roller, etc.
• solvent-free material, odorless, non-flammable, non-toxic, environmentally friendly
• suitable for use in poorly ventilated areas

Application

• waterproofing of horizontal slabs, concrete floors, against rising damp and negative pressure in warehouses, factories, residential buildings, etc.
• waterproofing of basements, tunnels, underground passages, etc., to be used in places of high water pressure and high friction
• line marking coating with non-slip finish, pedestrian crossings, warning lines, etc.
• waterproofing for underground car parks, garages, horizontal surfaces, ramps and other vehicle-prone surfaces

Technical data

• appearance of component A / component B milky white liquid / white or gray powder
• a density of component A (liquid) 1.03 0.10 g / cm ³ ; density of component B (powder) 1.10 0.10 g / cm ³
• density (A) + (B) 1.56 0.10 g / cm ³
• minimum application temperature for substrate and air> 5 ° C
• time of use at 200 C, 50% humidity 30-40 min
• minimum / maximum time between coatings at 200 C, 50% humidity 3-6 / 24-48 h
• setting time at 200 C, 50% humidity 6-10 h
• maturing time at 200 ° C, 50% humidity: pedestrian traffic 12-24 hours; vehicle traffic 24-48 h
• resistance to positive water pressure 9 bar (according to EN 12390-8)
• resistance to negative water pressure 3 bar (according to EN 12390-8)
• water absorption 0.01 (kg / m ² h0.5; EN 1062-3)
• vapor permeability class S _D (m): class I, breathable / 2.45 (according to EN ISO 7783-1 / -2)
• adhesion to concrete after 28 days> 3.0 MPa (according to EN 1542)
• consumption per layer / total 1.25 / 2.5 kg / m ²
• packaging: 35 kg set