A flexible, two-component, water-based aliphatic coating with protective properties and excellent abrasion resistance, designed for exterior applications. It is characterized by very good resistance to weather conditions and UV radiation, durability and color stability.

Features

• excellent adhesion to concrete and cement mortars - does not need any primer layer
• resistance to UV radiation, high durability and color stability
• very good abrasion resistance - suitable for road traffic and industrial floors
• long durability - it can withstand a wide temperature range and extreme weather conditions
• solvent-free
• based on water
• non-flammable

Application

• finish coat applied on Maxelastic PUR-W, which is subject to circular movement, protects them against abrasion and resistant to UV radiation
• finishing and protection of acrylic coatings such as Maxelastic or Maxelastic Stone with higher abrasion resistance, resistance to weather conditions and water
• a transparent protective coating that protects against staining such materials as Maxpatch, Concreseal Plastering and other cement mortars, concrete, wood, ceramic tiles, etc.
• decorative and protective finish, protecting concrete floors and floors against abrasion in parking lots, loading and unloading ramps, industrial premises, etc.

Technical data

• A: B component ratio in a 100: 1.5 mix
• specific gravity of component A (colored version) at 20 C (2 C) 1.14 0.1 g / cm ³
• specific gravity of component B (colored version) at 20 C (2 C) 1.05 0.1 g / cm ³
• specific gravity of A + B mix (colored version) at 20 C (2 C) 1.14 0.1 g / cm ³
• minimum temperature> 10 ° C
• maximum application relative humidity <90%
• time interval between the application of successive layers at 20 ° C and 50% relative humidity 6–12 h
• maturing time before handing over to pedestrian / total traffic at 20 ° C and 50% relative humidity - 1/3 days
• material consumption as an undercoat 0.10–0.15 kg / m ²
• material consumption as a surface coating 0.20–0.25 kg / m ²