Koester - injection concentrate Crisin 76 Concentrate
Price on request
discount price
net unit price
£13,33 for item
minimum trading quantity
the amount of product
1.00 item
total price
net list price
£16,03
for 1.00 item
total price
discounted net price
£13,33
for 1.00 item
price-list
gross unit price £19,72
for item
discount price
gross unit price
£16,40
for item
minimum trading quantity
the amount of product
1.00 item
total price
gross list price
£19,72
for 1.00 item
total price
gross discount price
£16,40
for 1.00 item
Product description
Solvent-free injection concentrate, based on synthetic resins. It is used to make a horizontal diaphragm to cut off capillary moisture. The preparation can be used even at a very high degree of salinity and moisture. The product is flexible after hardening. It can be used in self-dispensing systems - in special cartridges.
Properties
- solvent-free
- very low viscosity
- based on synthetic resins
- penetrates deeply, also into the finest capillaries
- Due to the much lower surface tension than water, the preparation has the ability to displace water from pores and capillaries in building materials
- capillaries after application of the preparation acquire hydrophobic properties
- the effectiveness of the injection concentrate is independent of the degree of moisture and salinity of the wall
- almost odorless
- remains flexible after curing
- not corrosive to reinforcing steel
- does not cause an exanthema
- resistant to all aggressive substances usually present in the walls, such as diluted bases, acids and salts, both in the application phase and after hardening
- in accordance with WTA guidelines - effective in leek moisture up to 95%
Application
- injection of an element in a structure made of mineral material (except for plaster walls) in order to recreate a horizontal insulation against capillary rising moisture
- the material in the system with capillary rollers is dedicated to injection in walls with voids, e.g. perforated brick, grid brick, ceramic blocks, silicate brick, etc.
- The concentrate can be used both indoors and outdoors, even with a high degree of salinity and moisture
Technical data
- density 0.91 g / cm 3
- method of operation: narrowing the pore diameter w / hydrophobization
- viscosity 10-15 mPa s
- solids content 70%
- consumption 0.04 l / m per 1 cm of wall thickness
Technical data