Kreisel - gel glue with nanoparticles 2
Price on request
discount price
net unit price
£11,14 for package
minimum trading quantity
the amount of product
1.00 package
total price
net list price
£13,34
for 1.00 package
total price
discounted net price
£11,14
for 1.00 package
price-list
gross unit price £16,41
for package
discount price
gross unit price
£13,70
for package
minimum trading quantity
the amount of product
1.00 package
total price
gross list price
£16,41
for 1.00 package
total price
gross discount price
£13,70
for 1.00 package
Product description
Flexible tile adhesive with cement-based nanoparticles and special silicas for bonding floor and wall tiles inside and outside buildings, including swimming pools and balconies.
Features
- flexible
- fine-grained
- frost-resistant
- thixotropic
- good flow under the plate
Application
- gluing stoneware tiles, also large-format and other types of terracotta, ceramic, wall, clinker and floor tiles, both to rigid substrates and susceptible to deformation, inside - and in the case of frost-resistant tiles - outside the building in
- gluing tiles on difficult surfaces, on balconies and terraces, in wet rooms (bathrooms, laundries, kitchens)
- for cement and anhydrite screeds, also with underfloor heating
- fine grain <0.3 mm and special polymers with nanoparticles contribute to increasing the comfort of work compared to traditional products
- possible adjustment of the water depending on the preferences of the contractor and the place of use (floor or wall)
Technical data
- grain size 0.3 mm
- C2TE classification (according to EN 12004 + A1)
- shelf life after mixing with water: about 3 hours (at a temperature of +20 C)
- time for laying tiles after applying the adhesive to the substrate up to 30 minutes
- correction time up to 20 minutes
- possibility of walking on the finished cladding after about 12 hours
- grouting possible after 48 hours
- layer thickness from 2 to 15 mm
- average consumption per 1 m 2 about 4.5 kg
- capacity for an average consumption of about 5.5 m 2 per package
- The mixing ratio with water is about 8.5 liters in water for 25 kg of dry mix
- adhesion ≥ 1.0 N / mm
- soluble chromium VI content ≤ 0.0002%
Technical data